XX-TRA — Cutting Merino Wool Pad
The XX-TRA Cutting Merino Wool Pad is a high-aggression wool pad built to erase heavy defects fast—sanding haze, deep swirls, and oxidation—while keeping machine control predictable. Natural Merino fibers cut quickly, stay cooler with proper technique, and set up a clean path for your next polishing step.
Available Sizes: 1.2" (pack of 5), 2" (pack of 5), 3", 5", 6"
Why You'll Love It
-
Maximum cutting speed on modern clear coats—ideal for leveling severe defects.
-
Merino wool fiber blend bites fast yet tracks smoothly over curves and edges.
-
Lower pad temps versus many foam cutters when cleaned and managed correctly.
-
Predictable finish that refines easily with a medium or finishing foam pad.
Ideal Surfaces
- Automotive clear coat with moderate to severe defects (RIDS, sanding marks, heavy oxidation).
-
Not for matte/satin finishes (always spot test specialty paints).
Machine Compatibility
-
Dual Action (random orbital) and Forced Rotation
-
Rotary (experienced users; manage heat and arm speed)
How To Use
-
Prep: Wash and decontaminate. If coating later, wipe panels with REVEAL Pre-Coat Surface Prep.
-
Prime & load: Fully prime the wool face with compound, then add 3–4 pea-sized drops.
-
Cut a small section: Work ~2' × 2' (60 × 60 cm) with slow, overlapping passes and moderate pressure; lighten pressure for the final passes.
-
Wipe & inspect: Remove residue with a clean microfiber; inspect under strong, focused lighting.
-
Keep fibers fluffed: Clean on the fly frequently (wool spur, pad brush, or compressed air). Swap pads if matted or saturated.
Pairs Well With
Notes: Always perform a test spot and use the least aggressive combo that achieves your goal. Avoid dry buffing; keep wool clean and cool for consistent performance.
